Manufacturer catalog record · independently reviewed

A. O. Smith AORO-50

A. O. Smith Reverse Osmosis System — documented on the A. O. Smith manufacturer catalog (observed 2026-08-13); listed model AORO-50. Exact-model performance, certifications and current availability are not yet independently verified.

Reverse osmosis systemEvidence still partialNot current inventory
A. O. Smith AORO-50
Product image associated with the cited manufacturer record.

Buyer and owner guide · reviewed Oct 15, 2026

At a glance: The A. O. Smith AORO-50 is a tank-based under-sink reverse osmosis system that needs no electricity. Its membrane is rated 41–53 gpd, but measured system production under NSF/ANSI 58 conditions is 11 gpd, so expect much less than the membrane figure.

Water System Guide is an independent research publisher. This model-specific document review was completed October 15, 2026. It is not a household performance test, installer quote or confirmation of current warranty, stock or certification records.

NSF/ANSI 58 reduction claims

The AORO-50 product page and sell sheet say the system is tested and certified by NSF International to NSF/ANSI 58. The sheet lists reductions including lead 99%, copper 99%, arsenic V 97%, fluoride 94%, TDS 94%, cysts 99%, nitrate 70%, nitrite 75% and radium 226/228 80%. The manual, page 4 limits nitrate/nitrite claims to supplies of at least 40 psi and no more than 27 mg/L nitrate and 3 mg/L nitrite as N.

Production, recovery and tank

The manual, page 4 lists membrane production of 41–53 gpd under industry conditions (65 psi, 77 °F, 250 ppm TDS). Measured under NSF/ANSI 58 conditions (50 psi, 750 mg/L TDS), system production is 11 gpd, recovery 26%, efficiency 12% and TDS reduction 90%+ typical. The storage tank holds 1.7 gallons.

Feed-water limits

The manual requires 40–100 psi, TDS up to 2,000 ppm, 40–100 °F, pH 4–11, hardness below 10 gpg (or soften), iron below 0.1 ppm, manganese below 0.05 ppm, no hydrogen sulfide, and microbiologically safe water. Chlorine damages the membrane, so the carbon pre-filter must be kept current.

Filter and membrane life

The manual, page 13 says to change the pre-filter modules every 6 to 12 months, more often above 1 ppm chlorine, and gives a typical membrane life of three years. Membrane production can drop 10% a year or more, depending on the water.

Five/one-year warranty

The manual warranty, page 20 covers the system for five years and the RO membrane for one year from purchase. A. O. Smith repairs or replaces defective parts, and the owner pays labor and shipping.

Frequently asked questions

Is the A. O. Smith AORO-50 NSF certified?

Yes. It is tested and certified by NSF International to NSF/ANSI 58 for the claims on its performance data sheet, including 99% lead reduction.

How much water does the AORO-50 produce?

The manual lists 11 gallons per day of system production under NSF/ANSI 58 test conditions, from a membrane rated 41–53 gpd, with a 1.7-gallon storage tank.

How often are AORO-50 filters changed?

Pre-filter modules every 6 to 12 months; the membrane typically lasts about three years.

What water pressure does the AORO-50 need?

40–100 psi. Nitrate and nitrite claims require at least 40 psi.

Sources for this model guide

  1. A. O. Smith AORO-50 product page — Undated current product page; reviewed 2026-10-15.
  2. A. O. Smith AORO-50 installation and operation manual — Undated manual linked from the product page; reviewed 2026-10-15.
  3. A. O. Smith PRO AORO-50 sell sheet and reduction table — 07/24, copyright 2024; reviewed 2026-10-15.

Known product details

Manufacturer
A. O. Smith
Model or family
AORO-50
Catalog name
A. O. Smith Reverse Osmosis System
Product category
Reverse osmosis system
Product family
AORO
Historical equipment price
No current verified price; no dollar price established.
Source reviewed
2026-08-16

Evidence and source boundary

Price and availability notes are historical source records, not live offers or stock checks. After any stated verification expiry, obtain a new seller check before relying on the value.

Level 4 current exact-model availability is not verified and remains under review. Do not infer stock, orderability, installation scheduling, or address-level service.

The controlling source for this catalog observation is aosmith.com, reviewed on 2026-08-16. A manufacturer page may change, redirect, or describe a family rather than every configuration; compare the exact current documentation before purchase.

What still needs confirmation

  • Certification: verify the exact model number, contaminant or reduction claim, standard, listing scope, and current certificate.
  • Sizing: match household demand, flow, plumbing, pressure, water chemistry, and waste/discharge requirements.
  • Ownership: confirm current equipment price, installation scope, consumables, maintenance intervals, warranty conditions, and service access.
  • Availability: manufacturer catalog presence does not establish current stock, dealer authorization, installer capability, or local availability.

How to use this record

  1. Copy the exact model or family name shown above.
  2. Open the cited manufacturer source and confirm that the current page still matches.
  3. Request the current model-specific specification sheet, certification listing, warranty, and installed-scope quote.
  4. Use water evidence and site constraints before comparing this product with alternatives.