Manufacturer catalog record · independently reviewed

EcoWater EEC1502R25

Manufacturer-listed water softener record in the EEC1502 Series family.

Water softenerEvidence still partialNot current inventory
EcoWater brand mark; exact EEC1502R25 product photography is not verified
Brand reference image only. Exact model photography has not been verified.

Buyer and owner guide · reviewed Oct 15, 2026

At a glance: The EcoWater EEC1502R25 is a 1500 Series "economical" two-tank water conditioner with an 8-by-40-inch resin tank and an optional shroud kit. It is rated at 26,600 grains. Its warranty is much shorter than on EcoWater's cabinet models, which matters when comparing quotes.

Water System Guide is an independent research publisher. This model-specific document review was completed October 15, 2026. It is not a household performance test, dealer quote or confirmation of current pricing, stock, warranty or certification records.

What the EEC1502R25 is

The EEC1502 specification sheet (0602943, Rev. D, 11/18) covers the EEC1502R25 and R40. It describes a digital demand module that records usage patterns to control regeneration, a time keeper that holds the time for at least 6 hours in a power loss, and automatic bypass during regeneration so water stays available. It also lists a fiberglass-wrapped tank, self-cleaning distributors and a positive-action brine valve.

The sheet says the softener was tested and certified by NSF International against NSF/ANSI 44 for hardness reduction and efficiency and NSF/ANSI 372 for low lead content. Check the current NSF listing for the exact model.

Capacity, salt efficiency and water limits

The specification table rates the EEC1502R25 at 26,600 grains at an 11.2 lb salt dose and 5,000 grains per pound at its 2.1 lb minimum dose. It holds 36 lb of high-capacity resin and 200 lb of salt, and uses about 32 gallons per regeneration at 35 psi.

Maximum hardness is 70 gpg and maximum clear-water iron is 4 ppm. Wisconsin requires additional treatment above 5 ppm clear-water iron.

Flow, size and installation limits

The sheet gives a 6 gpm service flow rate at 10.4 psi pressure drop and 7.5 gpm intermittent flow at 15 psi. The sheet notes that intermittent flow is not the service rate used to rate capacity and efficiency, and that running continuously above the certified flow rate may affect both.

The resin tank is 8 by 40 inches, with an overall height (dimension A) of 45-1/2 inches. It uses 1-inch plumbing and needs 20–125 psi and 40–120 °F water, in a 35–150 °F room. Power is 120 V, 50/60 Hz, through an included 28 V DC, 350 mA supply. An optional shroud kit covers the resin tank and controller for appearance or weather protection.

A shorter warranty than EcoWater's cabinet models

The EEC1502 sheet covers the mineral tank for ten years, the salt tank for five years, and the valve body, electronic faceplate and all other parts for one year.

That is much shorter than the lifetime tank and multi-year valve terms on EcoWater's 3700 Series sheets. Compare it with the extended-coverage options in each dealer's quote.

Frequently asked questions

What is the capacity of the EcoWater EEC1502R25?

EcoWater rates it at 26,600 grains at an 11.2 lb salt dose, and 5,000 grains per pound at its 2.1 lb minimum dose.

What flow rate does the EEC1502R25 support?

The service flow rate is 6 gpm at a 10.4 psi pressure drop, and intermittent flow is 7.5 gpm at 15 psi.

Is the EEC1502R25 NSF certified?

The sheet says it was tested and certified by NSF International against NSF/ANSI 44 for hardness reduction and efficiency and NSF/ANSI 372 for low lead. Confirm the current listing for the exact model.

What warranty does the EEC1502R25 have?

Ten years on the mineral tank, five years on the salt tank, and one year on the valve body, electronic faceplate and all other parts.

Sources for this model guide

  1. EcoWater EEC1502 manufacturer specification sheet — 0602943 (Rev. D) 11/18; reviewed 2026-10-15.

Known product details

Manufacturer
EcoWater
Model or family
EEC1502R25
Catalog name
EcoWater EEC1502R25
Product category
Water softener
Product family
EEC1502 Series
Historical equipment price
No current verified price; equipment and installed-scope pricing require current confirmation.
Source reviewed
2026-08-16

Evidence and source boundary

Price and availability notes are historical source records, not live offers or stock checks. After any stated verification expiry, obtain a new seller check before relying on the value.

Manufacturer catalog presence was observed in the pinned source workbook. Current stock, dealer authorization, installation scheduling, and address-level service are not verified.

The controlling source for this catalog observation is ecowater.com, reviewed on 2026-08-16. A manufacturer page may change, redirect, or describe a family rather than every configuration; compare the exact current documentation before purchase.

What still needs confirmation

  • Certification: verify the exact model number, contaminant or reduction claim, standard, listing scope, and current certificate.
  • Sizing: match household demand, flow, plumbing, pressure, water chemistry, and waste/discharge requirements.
  • Ownership: confirm current equipment price, installation scope, consumables, maintenance intervals, warranty conditions, and service access.
  • Availability: manufacturer catalog presence does not establish current stock, dealer authorization, installer capability, or local availability.

How to use this record

  1. Copy the exact model or family name shown above.
  2. Open the cited manufacturer source and confirm that the current page still matches.
  3. Request the current model-specific specification sheet, certification listing, warranty, and installed-scope quote.
  4. Use water evidence and site constraints before comparing this product with alternatives.