Manufacturer catalog record · independently reviewed

EcoWater ESD2802R39

Manufacturer-listed water softener record in the ESD2802 Series family.

Water softenerEvidence still partialNot current inventory
EcoWater ESD2802R39
Product image associated with the cited manufacturer record.

Buyer and owner guide · reviewed Oct 15, 2026

At a glance: The EcoWater ESD2802R39 is a 2800 Series two-tank softener: a resin tank with a separate salt tank. EcoWater rates it at 40,200 grains at a 15.4 lb salt dose. The sheet covers it alongside the ESD2802R30, so check which size your dealer is quoting.

Water System Guide is an independent research publisher. This model-specific document review was completed October 15, 2026. It is not a household performance test, dealer quote or confirmation of current pricing, stock, warranty or certification records.

What the ESD2802R39 is

The ESD2802 sales sheet (7401215, Rev. A, 07/24) covers two sizes, the ESD2802R30 and ESD2802R39. Its drawings show a separate resin tank and brine tank rather than a single cabinet. EcoWater describes patented AI technology that learns household water use so the softener regenerates only when needed. It lists salt monitoring alerts, a display showing water use, and a high-flow valve.

The ESD2802R39 uses a 10-by-47-inch resin tank, with an overall height (dimension A) of 57 inches. The sheet does not mention Wi-Fi or app monitoring.

Capacity, salt efficiency and water limits

The specification table rates the ESD2802R39 at 40,200 grains at a 15.4 lb salt dose and 5,040 grains per pound of salt at its 2.4 lb minimum dose. It holds 58.8 lb of resin, and both sizes hold 300 lb of salt.

Maximum recommended hardness is 110 gpg, stated at 500 gallons per day of use. Maximum clear-water iron is 5 ppm. Each regeneration uses about 36 gallons at 35 psi. For comparison, the ESD2802R30 is rated at 26,200 grains with a 95 gpg limit; see the ESD2802R30 profile.

Flow, plumbing and installation limits

The sales sheet gives a certified flow rate of 7.0 gpm at 7.0 psi pressure drop, with intermittent flow of 11.8 gpm at 15 psi and 18.1 gpm at 30 psi. The sheet notes that intermittent flow is not the service rate used to rate capacity and efficiency, and that running continuously above the certified flow rate may affect both.

It uses 1-inch plumbing and needs 20–125 psi supply pressure, 40–120 °F water and a 35–150 °F room. Power is 120 V, 50/60 Hz, through an included 24 V DC, 500 mA supply.

Warranty terms printed on the sheet

The ESD2802 sheet summarizes the warranty. For the lifetime of the original owner the mineral tank is covered against rusting, corroding, leaking or bursting; the salt tank is covered for ten years; and the valve body, electronic faceplate and all other parts are covered for three years.

Ask the dealer for the full written warranty, and confirm who handles service after the three-year parts term ends.

Frequently asked questions

What is the capacity of the EcoWater ESD2802R39?

EcoWater rates it at 40,200 grains at a 15.4 lb salt dose, and at 5,040 grains per pound of salt at its 2.4 lb minimum dose.

What is the difference between the ESD2802R30 and ESD2802R39?

The R30 uses a 9-by-35-inch tank and is rated at 26,200 grains with a 95 gpg limit. The R39 uses a 10-by-47-inch tank and is rated at 40,200 grains with a 110 gpg limit. Both list 7.0 gpm certified flow, at different pressure drops.

What flow rate does the ESD2802R39 support?

The certified flow rate is 7.0 gpm at 7.0 psi pressure drop. Intermittent flow is 11.8 gpm at 15 psi and 18.1 gpm at 30 psi, which EcoWater says is not the rated service flow.

What warranty does the ESD2802R39 have?

Lifetime on the mineral tank for the original owner, ten years on the salt tank, and three years on the valve body, electronic faceplate and all other parts.

Sources for this model guide

  1. EcoWater ESD2802 manufacturer sales and specification sheet — 7401215 (Rev. A) 07/24; reviewed 2026-10-15.

Known product details

Manufacturer
EcoWater
Model or family
ESD2802R39
Catalog name
EcoWater ESD2802R39
Product category
Water softener
Product family
ESD2802 Series
Historical equipment price
No current verified price; equipment and installed-scope pricing require current confirmation.
Source reviewed
2026-08-16

Evidence and source boundary

Price and availability notes are historical source records, not live offers or stock checks. After any stated verification expiry, obtain a new seller check before relying on the value.

Manufacturer catalog presence was observed in the pinned source workbook. Current stock, dealer authorization, installation scheduling, and address-level service are not verified.

The controlling source for this catalog observation is ecowater.com, reviewed on 2026-08-16. A manufacturer page may change, redirect, or describe a family rather than every configuration; compare the exact current documentation before purchase.

What still needs confirmation

  • Certification: verify the exact model number, contaminant or reduction claim, standard, listing scope, and current certificate.
  • Sizing: match household demand, flow, plumbing, pressure, water chemistry, and waste/discharge requirements.
  • Ownership: confirm current equipment price, installation scope, consumables, maintenance intervals, warranty conditions, and service access.
  • Availability: manufacturer catalog presence does not establish current stock, dealer authorization, installer capability, or local availability.

How to use this record

  1. Copy the exact model or family name shown above.
  2. Open the cited manufacturer source and confirm that the current page still matches.
  3. Request the current model-specific specification sheet, certification listing, warranty, and installed-scope quote.
  4. Use water evidence and site constraints before comparing this product with alternatives.