Manufacturer catalog record · independently reviewed

Watts M3015-CK10SM

Manufacturer-listed water softener record in the Water Softeners family.

Water softenerEvidence still partialNot current inventory
Watts M3015-CK10SM
Product image associated with the cited manufacturer record.

Buyer and owner guide · reviewed Oct 7, 2026

At a glance: Watts M3015-CK10SM is the standard-tank W100-metered softener listed as ordering code 68105343 in the 2026 dealer catalog. Its exact row gives 60,000 maximum grains, two cubic feet of resin and 15–20 gpm alongside 15–25 psi pressure drop. Keep those model figures separate from generic valve ratings and the differently suffixed M3015-W100SM manual table.

Water System Guide is an independent research publisher, not Watts or an installer. We reviewed the manufacturer’s exact catalog row and linked W100 literature on October 7, 2026. We have not field-tested the unit or verified current stock, prices, complete-system certification, warranty coverage or local service. Settings and installed limits require the supplied configuration’s documentation.

Match CK10SM and ordering code 68105343

The 2026 Watts dealer catalog, printed page 18 / PDF page 20 lists M3015-CK10SM, ordering code 68105343, under complete water softeners with Watts W100 control valves. The listed package has a standard mineral tank, black brine tank, float valve and bypass. Record that complete suffix and order code when you compare a quote or identify an existing unit.

M3015-W100SM and M3015-L10SM appear in other Watts documents. A similar capacity or tank size does not establish that those are the same configuration. In particular, the W100 manual's M3015-W100SM table is not a replacement for the catalog's CK10SM row.

For an installed system, retain label and controller photographs with the invoice. For a new purchase, request the exact supplied valve, tank and media record. This page's catalog reference does not establish current stock, seller authorization or installation availability.

Read the exact model row with its units

The CK10SM catalog row publishes these model figures:

Catalog field M3015-CK10SM value
Maximum softening capacity 60,000 grains
Pipe size 1 inch
Mineral tank 12 × 52 inches
Resin 2 cubic feet
Brine tank 18 × 36 inches
Salt fill 350 pounds
Service-flow range / pressure-drop range 15–20 gpm / 15–25 psi
Backwash 3.5 gpm
Shipping weight 190 pounds

These are catalog specifications, not measurements from a reviewed installation. Tank dimensions are not a complete installed footprint; allow the installer to document the valve, piping, drain, bypass and service access. Shipping weight is not an operating filled weight. The 350-pound salt-fill figure describes storage, not salt consumed in one regeneration.

The capacity column is explicitly a maximum. It does not settle the operating capacity at a particular salt setting or identify your household's daily load. Keep those questions separate from the catalog headline.

Do not replace the system flow with a valve rating

The exact CK10SM row places the 15–20 gpm range alongside a 15–25 psi pressure-drop range. Ask the seller which duty point and treatment conditions support the proposed installation. A high-flow number should not be treated as proof that every inlet hardness and simultaneous demand will produce the intended treated result.

The linked W100 operating manual, page 4 separately gives a generic valve-and-bypass service figure of 27 gpm at 15 psi drop. The page-5 rating note qualifies that bypass rating with straight fittings. That is a component rating, not the complete M3015-CK10SM softener's published flow. It also lists M3015-W100SM with a 3.2 gpm backwash value, whereas the exact CK10SM catalog row gives 3.5 gpm. Do not substitute the other model's drain figure.

Have the installer document available pressure, simultaneous demand and the installed drain-line flow control. Use the matched supplied-system instructions for drainage and commissioning. The catalog's backwash value describes a flow requirement; it does not state gallons per cycle or authorize a cycle duration chosen from another model.

Maximum grains and salt storage are different planning numbers

The catalog gives CK10SM's maximum capacity and resin amount. The W100 manual's model table includes salt-dose and capacity values for a differently suffixed M3015-W100SM. This review does not establish that the manual's 40,000-grain minimum or 12–30-pound dose range is an approved CK10SM setting.

Ask for the CK10SM operating capacity at the commissioned dose, reserve policy and measured inlet hardness. A useful proposal places capacity and dose on the same line, rather than combining a maximum grain claim with the lowest dose taken from another configuration. The grain-capacity guide explains that distinction for comparisons.

Also request how the controller handles reserve and calendar override. Those affect the operating plan and are not answered by the 350-pound brine-tank storage figure. The page therefore does not calculate a refill interval, annual salt cost or regeneration frequency from that storage figure.

The manufacturer links W100 to a bounded controller manual

The exact-model catalog identifies the W100 metered valve, and Watts' current W100 family page directly links the WM100SM operating manual. That is the manufacturer document chain used here. The family page describes regeneration based on water consumption, while the manual explains that configuration can include demand and time-clock behavior.

Before using a button sequence, compare the actual head and software with the supplied documentation. This profile does not prescribe factory setup, capacity, salt dose or installer-menu entries. The manual's table does not contain the CK10SM suffix, and an unchanged model label does not prove that an older installed head has not been replaced.

There is also an unresolved limit difference within manual page 4: one temperature table reaches 110°F while the valve/bypass table says 100°F. Its installation text uses 110°F. Ask Watts or the installer for the applicable complete-system pressure and temperature limits in writing; this page does not resolve the discrepancy or promote a generic table into a CK10SM approval. Confirm power requirements from the actual supplied head and transformer.

An owner record is more useful than guessing a component

The W100 manual explains configured regeneration and distinguishes a delayed request from an immediate cycle. Its service and troubleshooting sections cover internal components and setup. That does not make every remedy an owner maintenance task, and this page does not tell an unidentified head to advance through cycles.

For a service request, record the exact model/order code, controller photograph, sampled treated outlet, paired inlet/treated hardness, recent salt additions and any visible leakage. Note whether reduced pressure occurs throughout the day or only around a cycle. Record the displayed message without assuming a new valve, resin bed or injector is needed.

If you need to change settings or open plumbing, obtain the instructions for the installed head and let the installer resolve the model and document differences first. Keep a written commissioned settings record so later service does not rely on the maximum catalog capacity alone.

Keep softening, other treatment and the quote scope distinct

The manufacturer-linked W100 manual describes ion-exchange hardness treatment using resin and regenerant. The exact CK10SM package description does not identify a carbon stage or a OneFlow scale-conditioning system. Do not add chlorine, chloramine or other filtration claims because Watts sells separate products for those purposes.

Request an itemized quote naming M3015-CK10SM and each additional treatment stage. Include installation, commissioning, salt ownership and future service responsibilities. The Watts family page directs product-specific approval questions to exact documentation or a Watts representative; this profile has not independently verified a current complete-system certificate or the warranty applying to your transaction.

Compare equal scopes and obtain current prices, stock and address-level service directly. A published catalog row establishes the model information reviewed here; it is not a quote, a suitability approval or a guarantee of the result in your home.

Frequently asked questions

What ordering code identifies Watts M3015-CK10SM?

The 2026 Watts dealer catalog lists ordering code 68105343 for M3015-CK10SM, the standard-tank softener with a W100 metered valve. Keep the complete CK10SM suffix when requesting equipment or specifications.

Does the 350-pound salt figure mean salt used per regeneration?

No. The exact catalog row labels 350 pounds as brine-tank salt fill. It is storage information, not per-cycle consumption. Obtain the commissioned salt dose and capacity-at-dose record for this exact configuration.

Is M3015-CK10SM a 27 gpm complete softener?

The exact CK10SM catalog row lists 15–20 gpm alongside 15–25 psi pressure drop. The W100 manual’s 27 gpm figure describes the valve and bypass, not this complete softener’s treated-water performance.

Can I program CK10SM from the M3015-W100SM manual table?

This review has not established that substitution. The catalog and manual use different model suffixes and differ in storage and backwash values. Have Watts or the installer confirm CK10SM capacity, dose, reserve, drain and supplied-controller settings before programming.

Sources for this model guide

  1. Watts 2026 Water Quality dealer catalog — 2026 Full Line Catalog; C-WQ-Dealer 2604; reviewed 2026-10-07.
  2. Watts W100 family page and linked literature — Undated current W100 family page; reviewed 2026-10-07.
  3. Watts WM100SM valve operating manual — Undated operating manual; Form 0500-200, P/N XOSW100SM; title WM100SM valve; reviewed 2026-10-07.

Known product details

Manufacturer
Watts
Model or family
M3015-CK10SM
Catalog name
Watts M3015-CK10SM
Product category
Water softener
Product family
Water Softeners
Historical equipment price
No current verified price; equipment and installed-scope pricing require current confirmation.
Source reviewed
2026-08-16

Evidence and source boundary

Price and availability notes are historical source records, not live offers or stock checks. After any stated verification expiry, obtain a new seller check before relying on the value.

Manufacturer catalog presence was observed in the pinned source workbook. Current stock, dealer authorization, installation scheduling, and address-level service are not verified.

The controlling source for this catalog observation is watts.com, reviewed on 2026-08-16. A manufacturer page may change, redirect, or describe a family rather than every configuration; compare the exact current documentation before purchase.

What still needs confirmation

  • Certification: verify the exact model number, contaminant or reduction claim, standard, listing scope, and current certificate.
  • Sizing: match household demand, flow, plumbing, pressure, water chemistry, and waste/discharge requirements.
  • Ownership: confirm current equipment price, installation scope, consumables, maintenance intervals, warranty conditions, and service access.
  • Availability: manufacturer catalog presence does not establish current stock, dealer authorization, installer capability, or local availability.

How to use this record

  1. Copy the exact model or family name shown above.
  2. Open the cited manufacturer source and confirm that the current page still matches.
  3. Request the current model-specific specification sheet, certification listing, warranty, and installed-scope quote.
  4. Use water evidence and site constraints before comparing this product with alternatives.

Watts owner guides