Manufacturer catalog record · independently reviewed

HALO H-HYDRO-KIT

Manufacturer-listed drinking-water filtration record in the HALO Hydro Point family.

Drinking-water filtrationEvidence still partialNot current inventory
HALO brand mark; exact H-HYDRO-KIT product photography is not verified
Brand reference image only. Exact model photography has not been verified.

Buyer and owner guide · reviewed Oct 8, 2026

At a glance: HALO Hydro Point is a two-stage under-counter drinking-water filter: a sediment cartridge followed by a 0.5-micron carbon block, with a smart faucet, leak detector and air hammer arrestor. HALO's spec sheet lists the system as part number H-HYDRO and the replacement filter as H-HYDRO-KIT, the number this catalog record carries. HALO says to change filters annually.

Water System Guide is an independent research publisher. This model-specific document review was completed October 8, 2026. It is not a household performance test, installer quote or confirmation of current warranty, stock, price or certification records.

H-HYDRO vs H-HYDRO-KIT

HALO's Hydro Point spec sheet (December 2024) lists System Part #: H-HYDRO and Replacement Filter: H-HYDRO-KIT. This catalog record carries the H-HYDRO-KIT number under the Hydro Point name. If you are buying the complete under-counter system, ask for H-HYDRO. If you already own one and need cartridges, H-HYDRO-KIT is the number HALO gives for the replacement filter.

The sheet lists system dimensions of 7 inches wide, 4.75 inches deep and 12.75 inches high. Stage 1 is a sediment filter and stage 2 a carbon block filter.

What the two stages do, as HALO describes them

HALO's Hydro Point product page describes a 5-micron sediment prefilter followed by a coconut-shell solid carbon block with 0.5-micron pores. It claims reduction of VOCs, pesticides, herbicides, chloroform and other chlorination by-products. The spec sheet lists "VOC, pesticides, herbicides reduction" and "Filters down to .5 mic." among its features.

These are manufacturer descriptions. The documents we reviewed do not include a performance certification listing for these claims. Ask for the exact certification record before relying on a specific contaminant reduction.

Operating limits and feed water

The spec sheet lists 30–80 psi and 40–100°F. The owner's manual, page 4, says 40–80 psi with a pressure regulator required on the feed water, a minimum of 33°F, cold water only, and a connection to a municipal or well supply that is treated and tested to be microbiologically safe. The warranty sets 40–80 psi and 40–100°F.

The manual's feed limits include hydrogen sulfide 0.00 ppm, manganese 0.05 ppm, chlorine 1 ppm, pH 4–11 and turbidity below 5 NTU, with TDS not above 1,000. The warranty lists pH 3–11, TDS under 1,000 ppm and iron under 0.3 ppm. The manual suggests a softener or scale-prevention system if hardness exceeds 7 grains per gallon (120 ppm).

Filter changes and the smart faucet

The manual says to change filters annually (page 14). Shut off the supply and open the faucet for one to two minutes to depressurize. Unscrew each cartridge, fit the new one with its O-ring on top and hand-tighten. Then run the faucet about two minutes until the black carbon fines clear.

The smart faucet's circuit board has three programming options: 2,000 minutes or six months, 2,000 minutes or one year, and 3,000 minutes or one year (page 15). When it flashes red, the manual says to change the filters and battery together. HALO also recommends replacing the whole under-counter system every 10 years.

Two-year warranty terms

The Hydro Point warranty covers defective parts, excluding the replaceable filters, for two years from manufacture for the original owner. Filters are warranted only for defects in material and workmanship, because service life varies with local water.

The warranty is void if a licensed contractor did not install the system, if it was bought from a third party or liquidator, or, on a well, if no current water report went to HALO. It also makes the installer responsible for leaks from tubing or fittings and requires a pressure check of the whole system. See our HALO warranty guide.

Frequently asked questions

What is H-HYDRO-KIT?

HALO's Hydro Point spec sheet lists H-HYDRO-KIT as the replacement filter and H-HYDRO as the system part number for the two-stage under-counter Hydro Point.

How often do Hydro Point filters need changing?

HALO's manual says to change the filters annually. The smart faucet can be programmed for 2,000 minutes or six months, 2,000 minutes or one year, or 3,000 minutes or one year.

What water pressure does HALO Hydro Point need?

The manual and warranty specify 40 to 80 psi and require a pressure regulator on the feed water. The spec sheet lists a 30 psi minimum.

What is the HALO Hydro Point warranty?

HALO gives a two-year warranty on defective parts, excluding replaceable filters. It requires installation by a licensed contractor and purchase through an authorized licensed wholesale distributor.

Sources for this model guide

  1. HALO Hydro Point spec sheet — Dated 12-5-24 in filename; copyright 2024; reviewed 2026-10-08.
  2. HALO Hydro Point owner's manual — Uploaded November 2024; undated body; reviewed 2026-10-08.
  3. HALO Hydro Point limited two-year warranty — Dated 2-13-24 in filename; uploaded April 2025; reviewed 2026-10-08.
  4. HALO Hydro Point product page — Undated current product page; reviewed 2026-10-08.

Known product details

Manufacturer
HALO
Model or family
H-HYDRO-KIT
Catalog name
HALO Hydro Point
Product category
Drinking-water filtration
Product family
HALO Hydro Point
Historical equipment price
No current verified price; equipment and installed-scope pricing require current confirmation.
Source reviewed
2026-08-16

Evidence and source boundary

Price and availability notes are historical source records, not live offers or stock checks. After any stated verification expiry, obtain a new seller check before relying on the value.

Manufacturer catalog presence was observed in the pinned source workbook. Current stock, dealer authorization, installation scheduling, and address-level service are not verified.

The controlling source for this catalog observation is halowater.com, reviewed on 2026-08-16. A manufacturer page may change, redirect, or describe a family rather than every configuration; compare the exact current documentation before purchase.

What still needs confirmation

  • Certification: verify the exact model number, contaminant or reduction claim, standard, listing scope, and current certificate.
  • Sizing: match household demand, flow, plumbing, pressure, water chemistry, and waste/discharge requirements.
  • Ownership: confirm current equipment price, installation scope, consumables, maintenance intervals, warranty conditions, and service access.
  • Availability: manufacturer catalog presence does not establish current stock, dealer authorization, installer capability, or local availability.

How to use this record

  1. Copy the exact model or family name shown above.
  2. Open the cited manufacturer source and confirm that the current page still matches.
  3. Request the current model-specific specification sheet, certification listing, warranty, and installed-scope quote.
  4. Use water evidence and site constraints before comparing this product with alternatives.