Buyer and owner guide · reviewed Oct 15, 2026
At a glance: The SpringWell Well Water Filter and Salt Based Softener (WSSS) pairs an air-injection iron filter with a salt softener for private wells. SpringWell holds well orders until a water test is complete, and its product page and manual differ on some flow and connection figures.
Water System Guide is an independent research publisher. This model-specific document review was completed October 15, 2026. It is not a household performance test, installer quote or confirmation of current warranty, stock or certification records.
Iron filter plus softener for wells
The product page describes a well-water filter that reduces iron, sulfur and manganese, followed by a salt-based softener for hardness. It says SpringWell holds all well-system orders until water-test results are complete, and that a complete well test is needed to decide whether the system fits. The installation instructions describe an air-based oxidation filter ahead of the softener.
Published sizes
The product page lists softeners SS1, SS4 and SS+ at 32,000, 48,000 and 80,000 grains with 11, 13 and 20 gpm, and iron filters WS1 (1–4 bathrooms, 12 gpm) and WS4 (4+, 20 gpm). Operating pressure is 25–80 psi, water 36–120 °F and pH 6.5–10.
Where the documents disagree
The installation instructions, page 4 list WS4 at 18 gpm rather than 20, a WS4 pH range of 6.8–10, and 3/4-inch connections for SS1 and SS4 where the product page says 1 inch. Backwash is listed at 5 gpm (WS1) and 7 gpm (WS4) for the filter and 2–2.4 gpm for the softener. Make sure the well pump can deliver the backwash flow on top of household demand.
Warranty and price
The product page shows a lifetime warranty badge; this review did not find the written terms. Store prices change, so none is stated here. Ask for the warranty conditions before ordering.
Frequently asked questions
What does the SpringWell well water filter and softener combo treat?
The iron filter reduces iron, sulfur and manganese, and the softener removes hardness, according to the product page.
Does SpringWell require a water test for the well combo?
Yes. The product page says SpringWell holds well-system orders until water-test results are complete.
What flow rate does the SpringWell well combo have?
The product page lists 12 gpm for WS1 and 20 gpm for WS4. The installation instructions list WS4 at 18 gpm.
What backwash flow does the iron filter need?
The installation instructions list 5 gpm for WS1 and 7 gpm for WS4.
Related guides
Sources for this model guide
- SpringWell Well Water Filter and Salt Based Water Softener product page — Undated current product page; reviewed 2026-10-15.
- SpringWell WSSS1 / WSSS4 installation instructions — Undated linked edition; reviewed 2026-10-15.
Known product details
- Manufacturer
- SpringWell
- Model or family
- SpringWell Well Water Filter and Salt Based Softener
- Catalog name
- SpringWell Well Water Filter and Salt Based Softener
- Product category
- Water softener
- Product family
- Well Water Combos
- Historical equipment price
- No current verified price; equipment and installed-scope pricing require current confirmation.
- Source reviewed
- 2026-08-16
Evidence and source boundary
Price and availability notes are historical source records, not live offers or stock checks. After any stated verification expiry, obtain a new seller check before relying on the value.
Manufacturer catalog presence was observed in the pinned source workbook. Current stock, dealer authorization, installation scheduling, and address-level service are not verified.
The controlling source for this catalog observation is springwellwater.com, reviewed on 2026-08-16. A manufacturer page may change, redirect, or describe a family rather than every configuration; compare the exact current documentation before purchase.
What still needs confirmation
- Certification: verify the exact model number, contaminant or reduction claim, standard, listing scope, and current certificate.
- Sizing: match household demand, flow, plumbing, pressure, water chemistry, and waste/discharge requirements.
- Ownership: confirm current equipment price, installation scope, consumables, maintenance intervals, warranty conditions, and service access.
- Availability: manufacturer catalog presence does not establish current stock, dealer authorization, installer capability, or local availability.
How to use this record
- Copy the exact model or family name shown above.
- Open the cited manufacturer source and confirm that the current page still matches.
- Request the current model-specific specification sheet, certification listing, warranty, and installed-scope quote.
- Use water evidence and site constraints before comparing this product with alternatives.
