Manufacturer catalog record · independently reviewed

HALO H5-150

Manufacturer-listed whole-home filtration record in the HALO 5 family.

Whole-home filtrationEvidence still partialNot current inventory
HALO H5-150
Product image associated with the cited manufacturer record.

Buyer and owner guide · reviewed Oct 8, 2026

At a glance: The H5-150 is the largest HALO 5 size that HALO lists with a residential gallon rating: a 13 x 54-inch tank, 1.5-inch inlet and outlet, 148 pounds and 73 inches tall, rated at 2,000,000 gallons based on chlorine reduction at 1 ppm. It filters and conditions water. It does not remove hardness.

Water System Guide is an independent research publisher. This model-specific document review was completed October 8, 2026. It is not a household performance test, installer quote or confirmation of current warranty, stock, price or certification records.

The H5-150 specification

HALO's spec sheet, page 2, lists the H5-150 (system label "HALO 5 – 1.50"") with a 13 x 54-inch tank, 148-pound weight, 73-inch height, 13 x 13-inch footprint and 1.50-inch inlet and outlet. Its capacity is 2,000,000 gallons, and the sheet says capacities are based on chlorine reduction at 1 ppm of chlorine.

Compared with the H5-125 (12 x 52 inches, 1.25-inch connection, 121 pounds, 59 inches tall, 1,500,000 gallons), the H5-150 is 14 inches taller and 27 pounds heavier. See HALO 5 sizes compared for all four sizes.

Plan for the 73-inch height

The spec sheet lists the H5-150 at 73 inches tall, the tallest of the three sizes HALO rates in residential gallons. The footprint is only 13 x 13 inches, so the floor space is rarely the constraint. The height is.

Measure ceiling height where the system will stand, including room above the valve for service. The installation guide, page 3, requires a protected, dry, level and non-freezing location, a grounded 120-volt outlet that is not switch-controlled and a ¾-inch pressurized drain. Ask the installer to confirm the location before the system is delivered.

What 2 million gallons means

The 2,000,000-gallon figure on the spec sheet is a chlorine-reduction rating at 1 ppm. It is not a hardness rating, and it is not a promise at other chlorine or chloramine levels. The same sheet notes that conditioning results may vary with hardness above 25 grains per gallon.

By our arithmetic, a home using 400 gallons a day reaches 2 million gallons in about 13.7 years, and one using 500 gallons a day in about 11 years. The HALO 5 warranty commits to one carbon media package within 10 years of installation, so a longer paper life does not extend that term.

At the edge of the warranty scope

The HALO 5 warranty covers point-of-entry residential filters and conditioners with tanks up to 13 inches in diameter. The H5-150's 13-inch tank is the largest that fits that wording. The next size, the H5-200, has a 16-inch tank and a commercial label.

The warranty requires installation by a licensed contractor, online activation, 40–80 psi, 33–120°F and influent chlorine of no more than 1 mg/L. On a well, a current well water report must go to HALO. It provides one replacement tank, control valve parts for 10 years and one media package within 10 years, and excludes freight, handling, repairs and installation. See our HALO warranty guide.

It will not soften the water

HALO's FAQ answers "Will the water test soft after the system is installed?" with "NO," because the calcium is still present in an altered, suspended state. The spec sheet, page 1, identifies the HALO 5's fifth stage as the HALO ION in-line magnetic conditioner and states that the HALO ION 2.0 Plus scale inhibitor is not tested or certified by WQA.

A larger HALO 5 adds filtration capacity, not softening. If the goal is lower measured hardness, compare a softener such as the CK10, and see our HALO 5 installation guide for what start-up involves.

Frequently asked questions

What is the capacity of the HALO H5-150?

HALO lists 2,000,000 gallons for the H5-150, based on chlorine reduction at 1 ppm of chlorine. It is a filtration figure, not a hardness rating.

How tall is the HALO H5-150?

HALO lists a system height of 73 inches, with a 13 x 54-inch tank, a 13 x 13-inch footprint and a weight of 148 pounds.

Is the H5-150 covered by the HALO 5 residential warranty?

HALO's HALO 5 warranty covers residential tanks up to 13 inches in diameter, and the H5-150 has a 13-inch tank. The warranty also requires a licensed contractor installation, online activation and 40 to 80 psi.

What size connection does the H5-150 use?

HALO lists a 1.50-inch inlet and outlet. The spec sheet gives no gallons-per-minute service rating, so ask the installer for one.

Sources for this model guide

  1. HALO 5 spec sheet — Rev.3326 filename; copyright 2024 in document; reviewed 2026-10-08.
  2. HALO 5-Stage installation guide 68110751 — Rev.3326 filename; undated body; reviewed 2026-10-08.
  3. HALO 5 limited product warranty — Rev.3326 filename; copyright 2024 in document; reviewed 2026-10-08.
  4. HALO frequently asked questions — Undated current FAQ page; reviewed 2026-10-08.

Known product details

Manufacturer
HALO
Model or family
H5-150
Catalog name
HALO 5 Whole House Filtration & Conditioning H5-150
Product category
Whole-home filtration
Product family
HALO 5
Historical equipment price
No current verified price; equipment and installed-scope pricing require current confirmation.
Source reviewed
2026-08-16

Evidence and source boundary

Price and availability notes are historical source records, not live offers or stock checks. After any stated verification expiry, obtain a new seller check before relying on the value.

Manufacturer catalog presence was observed in the pinned source workbook. Current stock, dealer authorization, installation scheduling, and address-level service are not verified.

The controlling source for this catalog observation is halowater.com, reviewed on 2026-08-16. A manufacturer page may change, redirect, or describe a family rather than every configuration; compare the exact current documentation before purchase.

What still needs confirmation

  • Certification: verify the exact model number, contaminant or reduction claim, standard, listing scope, and current certificate.
  • Sizing: match household demand, flow, plumbing, pressure, water chemistry, and waste/discharge requirements.
  • Ownership: confirm current equipment price, installation scope, consumables, maintenance intervals, warranty conditions, and service access.
  • Availability: manufacturer catalog presence does not establish current stock, dealer authorization, installer capability, or local availability.

How to use this record

  1. Copy the exact model or family name shown above.
  2. Open the cited manufacturer source and confirm that the current page still matches.
  3. Request the current model-specific specification sheet, certification listing, warranty, and installed-scope quote.
  4. Use water evidence and site constraints before comparing this product with alternatives.

HALO owner guides